Which Series of Profiles Is Used for ZEKIN Doors And Windows?The answer is that all profiles of ZEKIN doors and windows are original 6063-T5 profiles!

During the profile production process, ZEKIN has set up a professional design team to strictly control the design and adjustment optimization of the mold, and use data management to monitor the actual production of the mold. In addition, ZEKIN uses a fully automatic extrusion production line to achieve large-scale and automated production. The product base material is strictly inspected according to EU standards.

After the profile is extruded, it is kept warm in a 200℃ environment through aging equipment to further maximize the performance of the profile.

The alloy ratio of 6063-T5 silicon-titanium-magnesium aviation aluminum alloy profile used by ZEKIN is precisely controlled at 0.1% titanium, 0.51% magnesium, and 0.39% silicon. The hardness of this profile is 4.5 times that of titanium-magnesium alloy, the toughness is 12 times that of titanium-magnesium alloy, the corrosion resistance is 17 times that of titanium-magnesium alloy, and the pressure resistance is 20 times that of titanium-magnesium alloy.

ZEKIN has its own aluminum factory and strictly controls the source of materials. The 6063-T5 profiles used by ZEKIN have high strength, high toughness, wind pressure resistance, corrosion resistance and other properties, only to produce high-quality aluminum alloy doors and windows.